I take an inordinate amount of joy in reusing projects in new and different ways. Way back in the winter, I built parallel light arrays for an indoor greenhouse. Obviously at the height of summer, such a device isn’t necessary. So what can you do with a little indoor greenhouse to make use of it?
The answer: a seamless lightbox for macro/closeup photography!
Parts
- 1 sheet of poster board
- 2-4 clothespins
- Indoor greenhouse
- 2 LED light ballasts
- 30 feet of 1/2” or 3/4” PVC
- 4 corner joints
- 8 T joints
- 2 plain white bed sheets
Tools
- Power drill with 1/8” bit
- Patience
Directions
Assemble a standing rig for the light array as shown below:
The yellow represents the LED light ballast. The black are PVC pipes. The red are the intersections where you place corner or T joints.
Once you have one, build a second.
After you have both, set them up on opposite sides of the greenhouse.
In the greenhouse, lay the poster board down on a middle shelf, then bend it slightly (without creasing it) to clip the top to the adjacent shelf.
Finally, clip the sheets on the sides of the greenhouse.
When done, you should have a seamless backdrop, side-lit to showcase items for sale on sites like Etsy and eBay, or just a way to photograph objects close up:
Above, this image was before the sheets were put on. You can see mild shadow effects in the image that went away after I installed sheets.
Try this out if you have leftover gardening structures!
You might also enjoy:
- Almost Timely News: Principles-Based Prompt Engineering (2024-02-25)
- Almost Timely News, January 7, 2024: Should You Buy a Custom GPT?
- Mind Readings: You Need Passwords for Life in the Age of Generative AI Fraud
- Mind Readings: Hacking Social Media Algorithms
- Mind Readings: Most Analytics Data is Wasted
Want to read more like this from Christopher Penn? Get updates here:
Take my Generative AI for Marketers course! |
Leave a Reply